30" Eccentric New Magnapower Eddy Current

Magnapower Eddy Current Arrives at Alan Ross Machinery Corporation.

MSW metal recovery, wood waste processing and aluminum extrusion is easier now with Magnapower’s uniquely designed Eddy Current Separator.

Northbrook, IL – November 1, 2011

Alan Ross Machinery is pleased to announce the arrival of the 30" Eccentric New Magnapower Eddy Current.  Magnapower Equipment Ltd has been producing eddy current separators and magnetic separation units for over 30 years and is one of the United Kingdom’s major suppliers. 

Magnapower’s high efficiency Eddy Current Separator is a market leader because of the following features:

·       Eccentric / offset rotor design: Adjustable rotor gives maximum magnetic force

·       Maximum pole to rotor diameter ratio: Higher frequency of the inducing field charges the particles, allowing for more effective separation with a 3,500 Gauss rating, compared to other manufacturers at 2,500.

·       Rare Earth (Neodymium Iron Boron) magnet system: The inductive force of a rare earth magnet is about nine times greater than that of a ferrite magnet, increasing the efficiency of non-ferrous separation.

·       Anti-leakage magnets:  Increases inductive force resulting in a cleaner separation, especially for smaller sized non-ferrous particles.

·       Variable rotor speed

·       Variable belt speed

·       Belt cleaning brush: Improves the life of your belt

Magnapower’s eddy current is designed for high usability and easy maintenance.  Wear parts are in stock and ready for shipment.  

A Magnapower vibratory feeder is also available to allow material to be spread evenly over the conveyor belt.  Spreading material in a monolayer will result in a cleaner separation. While the design of the Magnapower Eddy Current Separator can handle occasional ferrous material without serious consequences, it is highly recommended to remove this material before running it over the eddy current.  An optional drum magnet quotation for a standard strength ferrite magnet, best for removal of general tramp ferrous metal as well as a high intensity rare earth magnet recommended for higher extraction efficiency can be provided upon request.  Both the Magnapower manufactured vibratory feeder and drum are available at an additional cost.

Alan Ross Machinery in Partnership With CAEB International Introduces the Omnipress 800 Compactor.

The Omnipress 800 is a rotary compactor/baler engineered to reduce waste material size by as much as 75%.  Its heavy-duty design is intended for industrial use, but its appearance and controls are suitable for commercial environments.  Compacting produces a bale that is approximately 32 inches (80 cm) long, with a diameter of 16 inches (40 cm) and has an average weight of approximately 88 lbs (40kg).  The complete compacting cycle for each bale is about 4 minutes, with a estimated capacity of 1765 lbs (800 kg) per hour.


Advantages of the CAEB 800 Compactor:



1.) Flexibility: The Omnipress can compact and package (tie) cardboard, film, fabrics, plastic bottles, aluminum cans, wooden and plastic crates, medical waste and binding materials, and more.  Ask us about your application.  Its ability to compact expanding materials like foam rubber also sets it apart.

2.) Simplicity:  The operator only has to feed the material to the charging chamber and the machine does the rest.  The automatic tie, and automatic eject makes this a one person  operation.  


3.) Mobility: At just 43 inches (110 cm) long, 53 inches (134 cm) deep, and about 79 inches (200 cm) high, and a weight of less than 2,000 lbs (875 kg), this machine can be easily transported using a forklift or pallet truck.  It can also be easily incorporated into continuous production lines.

4.) Safety: The Omnipress is equipped with numerous safety devices, including safety switches and an automatic safety bar that stops the machine’s operations when the operator comes into contact with the charging chamber.  The safety frame ensures that an adequate distance is maintained from the automatic opening where the bale is slowly ejected.  A sensor prevents the compactor from being overloaded and the unit has a reversing mechanism for dealing with overfeeding of materials.

It's Here!!

ELME Clamshell Grapple-Magnet Arrives In the States
Waste Recyclers Across North America Can Now Sort And Handle Ferrous And Mixed Waste With ELME’s Advanced Grapple-Magnet Technology.
Northbrook, IL – January 31, 2011


News Facts
•Alan Ross Machinery Corp. announced the arrival of the ELME Clamshell Grapple-Magnet at its Northbrook, IL facility (20 minutes north of Chicago’s O’Hare airport).
•This new technology helps waste handlers recover ferrous scrap from paper, plastics and other mixed wastes unlocking value in mixed waste, and protecting equipment from damage by ferrous scrap contaminants.
•With the ELME Grapple-Magnet, operators can alternate between the grapple and magnet without switching equipment, leaving the operator’s cab or sacrificing mobility.
•The ELME Grapple-Magnet is hydraulically actuated; it rotates 360 degrees and the clamshell tines expand to 78” when fully extended.
•The approximate overall weight of the ELME Grapple-Magnet assembly is 4,000 lbs.

Supporting Quotes
•“North American waste handlers are looking for new ways to increase revenue and protect capital equipment from excessive wear and damage,” says Rustin Ross, President of Alan Ross Machinery Corp. “The arrival of the ELME grapple magnet means US recyclers now have an innovative tool available for mobile recovery of ferrous scrap.”
•“It is one of the most useful machines that has come to our facility, combining the capability of a grapple and the lifting power of a magnet," says Katie Lechelt, Magnetics Product Manager for Alan Ross Machinery Corp.

Supporting Resources
•Alan Ross Machinery Corp. website: www.alanross.biz
•Alan Ross Machinery Corp. magnetics micro-site: www.scrapmagnets.com

About Alan Ross Machinery Corp: Alan Ross Machinery Corporation has North America's largest inventory of used and new scrap processing and recycling equipment. They offer low prices, new & used equipment sales, professional appraisals, plant-liquidations, auctions and surplus industrial asset management. Alan Ross Machinery also owns many of the equipment items they sell. Alan Ross Machinery supplies the scrap processors, recyclers and waste handlers in over 52 countries with the equipment needed to keep up with the changing market.

About Elme (Almhults El-Mek AB): ÄLMHULTS EL-MEK has been working at the forefront of the electro-mechanical industry since 1955, developing methods and manufacturing machines for environmental and recycling operations. By cooperating closely with customers and end-users they have been able to find technological solutions to a variety of challenges and problems - innovations which in many instances have resulted in patented products.